For Metal Spindles

Handrails made with white oak for use with Elements metal spindles. These handrails have pre-drilled holes to make installation easier. No further drilling is required on these stair parts, you simply apply a bead of adhesive to the bottom of each hole and slot the metal balusters into place. Handrail lengths are available for use on the stairs and for landings, so your oak and metal balustrade can continue from the rake onto the horizontal and the holes drilled in the baserail are angled so the spindles will naturally sit in the correct position.

The handrails in this range are white oak which provides a traditional look and feel, but when combined with the black metal spindles you get a much more modern look. These oak handrails are available in a selection of lengths and can also be cut to the required length.

Set Descending Direction

5 Item(s)

Set Descending Direction

5 Item(s)