For Metal Spindles

Baserails made with oak for use with Elements metal spindles. these baserails have pre-drilled holes to make installation easier. No further drilling is required on these baserails, you simply apply a bead of adhesive to the bottom of each hole and slot the metal balusters into place. The baserails in this range are white oak which provides a traditional look and feel, but when combined with the black metal spindles you get a much more modern look.;

Baserail lengths are available for use on the stairs and for landings, so your oak and metal balustrade can continue from the rake onto the horizontal and the holes drilled in the baserail are angled so the spindles will naturally sit in the correct position. These oak baserails are available in a selection of lengths and can also be cut to the required length.